фоллаут 4 прицелы мод

UPDATE 2.4.0
— Added an optional Power Armor fix. This fixes the issues some 8x Combat Scopes have when using the X-01 Right Arm or the Tesla Right Arm. Works by modifying first person meshes of said Power Armor items.
— Included Dynamic Sway as suggest by iCake. Crouching, the Sniper Perk, Stability Armor/Weapon mods now reduce the amount of sway. Tweakable if necessary. See description for details.
— Consisteny pass. Some scopes got the benefit from the Sniper Perk while they shouldn’t and vice versa.
— Lever Action Combat Scopes have been redone.
— Optional Recon Ripple Effect Remover. Removes the distortion effect when using Recon Scopes.
— Added support for the Creation Club Manwell Rifle and Carbine
— Fixed the incorrect, double hold breath prompt when using a vanilla, overlay scope.
— Fixed an issue where certain sights would not have the correct sway applied to them.

UPDATE: 2.3.6
— Fixed the Deliverer scopes becoming opaque when firing too fast
— Forced patch to fix the broken ‘crippled arms animation’ for the Service Rifle by DeadPool to be installed always
— Added a patch to fix the broken ‘crippled arms animation’ for the M2 Flamethrower, as the author of that mod hasn’t included this fix in his mod yet.

UPDATE: 2.3.5
— More fixes and updates to the Hold Breath Feature
— Attempt 2 at preventing it from staying after stopping with aiming
— Activating the hold breath trigger while not aiming will now delete it, allowing for users to clean it up.
— Fixed the CC Zetan Arsenal scopes not working correctly and appearing opague
— Fixed a vanilla issue: the pipe revoler with a pistol grip had broken «arms are crippled» animations. This is now fixed, which means the weapon functions normally when using STS
— Updated the add-on for the Hand Made Antimateriel Rifle by Shoeburglar. Make sure the HMAR is updated as well.
— Added an auto-detect feature to the installer for the weapon add-on patches
(Note 1: works only properly in Vortex and is still buggy: if you enable this option and then disable it again later, it remains enabled. Restart the installer to fix this)
(Note 2: In NMM, it is enabled and cannot be disabled, again, due to a «bug» in NMM)
(Note 3: If you hate this behavior in NMM, there is a non-auto detect version available for download)

UPDATE: 2.3.4
— Changed the way the mod handles the ‘Hold Breath’ activator. It deletes and respawns it now instead of hiding it. Should fix issues with the activator randomly disappearing during a playthrough.
— Fixed an invalid reference in the TakeCover path
— Changed the way the installer handles a patch for the Service Rifle
— Fixed the installer installing pack 6 instead of pack 5 and vice versa.

HOTFIX 2.3.3
— Fixed broken animations on the Caravan Shotgun if installed
— Fixed a rare issue where the Hold Breath Activator would disappear
— Fixed the RU556 scopes being horrible misaligned due to a copy error
— Included the ‘Fix First Person to Third Person reload bug patch’ by default
— Should have fixed NMM download issues

HOTFIX 2.3.2
— Fixed an issue with the FOMOD installer not properly installing an animation patch for the F4NV Service Rifle
NOTE: Expect some issues due to the size of the update

HOTFIX 2.3.1
— Fixed some issues with the FOMOD installer not properly installing meshes or ESP’s
NOTE: Expect some issues due to the size of the update

UPDATE: 2.3.0
— Added Hold Breath Feature
— Added configurable sway. Sway while aiming can now be configured.
— Reworked script logic
— Recentered ALL scopes due to animation/logic changes with the hold breath feature
— Added three new reticles and a new dot:
— Reticle: DR4, Small
— Reticle: Rangefinder
— Reticle: Rangefinder Triple, Small
— Dot: Cross, Rangefinder
— Changed the thin chrevron to a small chevron
— Added

17 new addon patches
Fixes:
— Fixed the Lk-05 2.5x scope not being centered
— Fixed the R91AR Recon Scopes not being centered
— Fixed a black reticle issue with Vektor 2.5x Combat Scope
— Fixed the workbench icon for the chevron dot

UPDATE: 2.2.3
— Fixed an issue with the replacer version of the Smaller Institute Weapons Patch

UPDATE: 2.2.2
— Fixed an issue with a debug notification appearing when it shouldn’t
— Fixed the issue where entering a vertibird would break the auto-toggle perspective option.
NOTE: Requires to disable, then re-enable this feature.

UPDATE: 2.2
— Added the RobCo Recon Scope patch

UPDATE: 2.1.1
— Fixed an issue with the 4x Mosin Nagant Scope
— Fixed an issue with the Creation Club Prototype Gauss Rifle in combination with the prepacked files
— Fixed an issue with papyrus log spam*
— Fixed some issues with the Lee Enfields 8x scope, and combining scopes with the silenced barrel

* NOTE: Update the mod, then download Fallrim Tools to edit your save. In the «Scripts» and «Script Instances» section, remove any reference to «CombatScopeFixPowerArmor» and «CombatScopesForceFirstPerson». This should solve the papyrus spamming

UPDATE: 2.1.0
— Fixed an issue involving character behavior (not being able to rotate head and such)
— Fixed a misaligned scope for the R91 Assault Rifle
— Properly fixed an issue with regard to certain reticle customizations not working as intended.
— Added a couple of animation patches
— Added an option to remove (most) of the lens reflection when aiming
— Added an addon for the Lee Enfield by asXas

HOTFIX: 2.0.2
— Fixed the non-dlc Main ESP’s. No longer requires both DLC’s
— Fixed the Far Harbor ESP’s. No longer requires Nuka World
— Update the Reticle Customization to work with mods using «not-properly-constructed» material swaps.
— Updated some scope models a little bit to have a clearer view (Combat Rifle/Machine Gun)

UPDATE: 2.0.1
— Fixed an issue where using the Hunting Scope Recon Combat Scope (8x) would result in the player being unable to fire for the remainder of the session
— Fixed an issue where certain armor pieces would clip when aiming with certain 8x scopes
— Fixed an issue where the prepacked archive files were incorrectly named
— Fixed an issue with the Service Rifle scope reticles not being customizable
— Fixed some typos in the installer
— Slightly adjusted the Hunting Rifle scopes to make the sway more centered

UPDATE: 2.0
Complete redo of the mod. Techinical side of how scopes work has been changed.
Allows more scope shapes.
This initial version will probably contain some small errors.
A general outline of the changes in this update:
— More consistent crafting recipes/perk requirements
— All weapons now have 2.5x, 4x and 8x (Recon) Scopes
— Replacer version now replaces the short scope (4x) and medium scope (8x)
— Reticle textures have been redone
— Framework merged by default into the main ESP
— Dropped some addons that were no longer available on NexusMods
— Added a patch for Smaller Institute Weapons
— Added some additional addon patches
— Changed the holotape-giver-quest, should now work fine 😀

This mod aims to bring see through style scopes like you are used to from games like Call of Duty to Fallout.
This means that the there is no fade or scope overlay when using these scopes. The mod calls these Combat Scopes.
The scopes are available for most vanilla weapons. You can pick from 2.5x, 4x or 8x zoom.
Recon Scope variants are also available, with the same zoom options.
The 4x and 8x scope variants are affected by the sniper perk, the 2.5x scopes are NOT.
All the reticles for these scopes can be customized in-game.
The Scopes should spawn on NPC’s as well, and can be crafted on the weapons workbench.

The mod comes in two versions, ADD or REPLACE. The add version just adds the scopes to the game, and that’s it.
The replacer version REPLACES the Short and Medium scopes with 4x and 8x Combat Scopes respectively.
Furthermore, the Short Recon Scope is replaced with a 4x Recon Combat Scope, and the Long Recon Scope is replaced with an 8x Recon Combat Scope.
The 2.5x Combat Scope do not replace any existing scope, they just get added to the workbench.

The mod also comes with a settings holotape. You should get it automacally.
If you somehow lost the tape, or did not receive it, no worries. You can craft it at a Chemistry Station under the aid section.
With this settings tape you can do the following:

— Enable or disable Forced First Person Perspective when aiming
This forces your perspective into first person whenever you are in third person and try to aim while using a Combat Scope.
After you stop aiming, the perspective is restored to third person, if you previously were in third person.

— Toggle whether the Forced First Person Perspective works just for Combat Scopes or always

— Enable a blur effect when aiming using a Combat Scope

— Set the strength of the blur effect

— Enable/Disable the hold breath feature for specific types of sights

— Configure the intensity and speed of the wobble effect while aiming

All bonuses are additive. So if you have the Sniper Perk, a Sharpshooter Stock and you are crouching, then sway is reduced by 15% + 15% + 30% = 60%
NOTE: These exact values can be tweaked by the user. See the «In-Game Options» section for details.

Easiest way is to use Nexus Mod Manager.
During the installation process, pick whether you want the ADD or REPLACE version of the mod, which DLC’s you have, and if you want to install add-ons
ONLY INSTALL ADDON-PATCHES FOR WEAPONS YOU ACTUALLY HAVE!

For a manual installation guide, see the articles section

It is recommended to do the following:
— Disable all the See Through Scopes related ESP’s, load your game.
— If enabled, disabled the blur and forced first person effects.
— Save your game.
— Exit the game
— Update the mod
— Re-enable all the See Through Scopes related ESP’s
This will cause all your scopes to disappear from your weapons.
It is possible to just update the mod without going through the hassle of disabling the mod first, though this might cause issues.

NOTE: It is most likely that all the scopes on add-on weapons will disappear, due to those ESP’s being completely redone

In game, you should have the See Through Scopes Settings Holotape in your inventory. Using this holotape, you can tweak the following behavior:
— Enable / Disable a blur effect when using Combat Scopes (applies to the scopes the Hold Breath feature is set to)
— Enable / Disable the Hold Breath feature, or tweak to which sights it should apply (Combat Scopes 4x and up / All Combat Scopes / All Sights)
— Enable / Disable a Forced First Person Perspective when aiming while using a Combat Scope
— Adjust the intensity and speed of the (optional) wobble effect applied when the Hold Breath feature is enabled

*Due to how this is implemented, each single armor piece counts as two. To achieve reduction of 10% per piece, set this value to 0.05

Now, enter the following into the console:
set to
For example, if I want to set the Crouch Sway Reduction to 55%, I would enter:
set SeeThroughScopesCrouchSwayReduction to 0.55
Repeat this process for every setting you want to customize
. IMPORTANT. You’re not done yet!
Open the See Through Scopes Settings Holotape, and pick the option «Load Custom Settings»
This will update the mod to use the values you just entered.

If you want to reset all these settings to their default, pick the option below it, «Reset to Default»

PROBLEM: Duplicate scopes are showing up in the crafting menu, are not mounted properly and are off-center
FIX: This is most likely caused by installing an add-on patch for a weapon you have not installed.
Disable this addon and the duplicate scopes should go away

PROBLEM: The Hunting Rifle 8x Scope is unusable when in my X-01 Power Armor (atleast have the right arm equipped)
FIX: There is an option in the installer to patch this issue.

PROBLEM: Combat Scopes affect the fire rate of the Hunting Rifle/.44
FIX: No fix. This has to do with how the scopes works. The ‘negative’ effect is losing just 1 point in your fire rate, which should be acceptable.

PROBLEM: I do not have my ‘See Through Scopes Settings’ holotape
FIX: Go to the Chemistry Station and look under the Misc tab. You should be able to craft it there. If it isn’t there, then the ESP is simply not active.

PROBLEM: Changing the player scale makes the reticles become off-center
FIX: Dont change your player scale 😛 As far as I am currently aware of, there is nothing much that can be done.
Other than manually tweaking all the offsets. It’s a vanilla problem. For instance, set the player scale to 0.1 and try using any vanilla sight. It will be off center as well.

PROBLEM: Changing the FOV has weird effects on the (8x) scopes
FIX: Make sure your 3rd and 1st person FOV is set to the same value. This can be done using the console like so: «fov 90 90»

Mods that already include Combat Scopes by themselfs:
.233 Pistol by Skibadaa
Alien Assault Rifle by henkspamadres
Desert Eagle by stabcops
Gatling Rifle by henkspamadres
IF-54 by Skibadaa
Jaguar MSX 200 LMG by DOOMBASED
Modular Kalash Assault Rifle by DOOMBASED
Pipe Shotgun by Elgoes
SCAR-LK by Doom
WH-77 by Skibadaa

v1.18 High Quality reticles made by mancika

89f33dc4db52a13c 3235cec9907584d5
e60601e21d1042c2 85666e934ff6f2db
f947d433264fdd90 64452a28ccbf33bb
12050cb2f23c601c 252c5404303b3e0e
6bbd2c70cabeedbb 4664b21c9917a5a6
99786ce92960fb65 ec27cdd360a1e377
766ebf545d137fdd abb9dedf2efabbdb
dd621a879c49d6b7 2ead9f9d6c7baa78
494b74ca61fb3ed8 12c23c146d8cc124

Some models, most likely for add-on weapons, are edited models of said add-on mod. Thus, some ‘custom’ scope models are not my own.
I merely made some very small edits so you would be able to see through them. Therefore, I take NO credit for these models.
If I am using one of your custom models and do not see your name listed below to acknowledge it is yours, please let me know.
Also, if you don’t want me to use your model, please let me know as well.

Источник

Fallout 4 — Улучшение прицеливания (Интерфейс)

Что этот мод делает?

Исправляет неудобное прицеливание от плеча! Вот что он делает, теперь при нажатии ПКМ вы по прежнему будете видеть точку (прицел) по середине экрана.

Установка: используйте любой мод-менеджер, или просто скопируйте папку Data в папку с игрой.
Открыть Fallout4.ini и в секции [Archive] проделать следующее:
изменить «sResourceDataDirsFinal=STRINGS\» на » sResourceDataDirsFinal=STRINGS\, TEXTURES\, MUSIC\, SOUND\, INTERFACE\, MESHES\, PROGRAMS\, MATERIALS\, LODSETTINGS\, VIS\, MISC\, SCRIPTS\, SHADERSFX\, VIDEO\». Сохранить.

У меня в коллиматорных прицелах пропадает точка, перезагружаю игру на тоже место и почему то она появляется вновь?

это вообще вид от 1 лица.причём тут от плеча?

Мод положил игру, вылетает при загрузке стабильно. Играю на последней стимовской версии

Чувак, я удалил файл HUDMenu.swf, и всё заработало 😀
D:\Games\Fallout 4\Data\Interface\HUDMenu.swf

Для отправки комментария вам необходимо авторизоваться.

Источник