стим клиент для гаррис мод

Гаррис мод мультиплеер

Режим мультиплеера в Гаррис моде доступен в лицензионной и взломанной версиях. Чтобы запустить игру вместе с другими игроками, нужно скачать сам GarrysMod. В репаке должны находиться последние обновления для корректного отображения всех объектов и игрового процесса. После этого, пользователь должен выполнить несколько шагов для подключения:

Интересные статьи:

Стоит отметить, что после «connect» – вводится адрес, состоящий из цифр. Их можно найти на форумах или на сайтах, которые предоставляют список самых популярных серверов.
StartNewGame – Указать настройки сервера и нажать Startmultiplayer (если вы хотите открыть свой собственный сервер для друзей) Нужно прописать в консоли команду «status», чтобы узнать свой собственный адрес

После чего сообщите друзьям и дайте им значение для входа.

Информация об игре

Название: Garry’s Mod или GMod;
Дата выхода: декабрь, 2004 года;
Жанр: SandBox;
Разработчики: Valve и TeamGarry;
Язык: с русификатором, оригинал – английский;
Таблетка: только во взломанных версиях.

Системные требования

ОЗУ: от 512 МБ;
Процессор: 1,6 Ггц;
Видеокарта: с поддержкой Directx 9;
ОС: от WindowsXP и выше;
Подключение к сети.

ОЗУ: от 1 Гб;
Процессор: AMD Athlon (3.0 ГГц или лучше);
Видеокарта: от Directx 9;
ОС: от WindowsXP и выше;
Подключение к Интернету.

Описание игры

Garry’s Mod представляет собой физическую песочницу, выполненную по типу Half-Life 2. Модификация позволяет создавать собственных персонажей, использовать встроенных и дополнять различные миры. При помощи такой «песочницы», можно создавать собственные сервера и играть вместе с другими пользователями.

Первоначально, была выпущена в режиме онлайн только для лицензионных версий. После взлома и установки специальных ключей, сандбокс стал доступен и для пиратских версий.

Помимо обычных режимов, в игре представлены и пользовательские, доступные к редактированию: начиная от изменения внешнего вида персонажей и заканчивая проектирование собственных устройств и установок.

Назвать игрой Гаррис Мод сложно, лишь потому, что она не имеет своего собственного жанра. Отдельные сервера представляют собой мини-игры, со своим сюжетом и персонажами. Игроки могут пользоваться уже созданными объектами и функциями. Благодаря уникальной системе встраивания дополнительных моделей и персонажей, пользователи могут самостоятельно создать объект в 3D-редакторах и поместить в песочницу.

Помимо этого, на сайте можно найти множество библиотек предоставляющие уже готовых персонажей.

Уникальный модификатор стал основой для множество других игр, где главной идеей стал запуск приложений, не входящих в состав самой программы. Тонкая настройка и программируемость различных элементов, делает песочницу интереснее и увлекательней. Её можно приобрести в Steam или же установить пиратскую версию со всеми обновлениями.

Источник

Стим клиент для гаррис мод

А где Toybox?
Toybox был в Garry’s mod 12

Я пытаюсь поиграть на НАЗВАНИЕ КАРТЫ, но игра вылетает!
Source 2006 не поддерживает HDR и новые карты, созданные для Source 2007+

Я установил мод на транспорт/энтити/пропы/оружие/инструмент, но он не работает!
Возможно, твой аддон создан для более новой версии. Поищи более старую версию

Я хочу создать сервер, а игра качает свои же файлы!
Это нормально, надо подождать окончания загрузки скриптов

Я пытаюсь запустить игру, но она вылетает с ошибкой You are not subscribed to garrysmod.
Халявы не будет. Купи игру или зайди с аккаунта, на котором есть Garry’s mod. На крайняк же можешь попробовать Steam Family Library Sharing

Зачем это надо, если можно скачать пиратку?
Здесь не будет проблем с мультиплеером и причуд от репакеров, а установка проще

Рекомендуется ставить аддоны 2006-2008 годов, аддоны новее скорее всего не будут работать. Новые карты с HDR будут работать либо с графическими артифактами или не загружаться вообще.

Хочется Garry’s mod 11 или 12? Добро пожаловать в группу Garry’s mod 11 Classic

Источник

Стим клиент для гаррис мод

A tutorial on how to host a Garry’s Mod Server using SteamCMD, completely written from scratch. It will include: How to install the server, how to forward the port for it, and how to add workshop addons to it (and a bit more).

(Due to the amount of content in this guide, you might think that this is complicated, but trust me, it’s not. Once you have some good understanding, it’s very easy and you can run and manage a server flawlessly.)

First, you need to download SteamCMD, of course. This program is used to install the actual files for your server, and to install the Garry’s Mod files.

You can download SteamCMD here.
(Direct download link http ://media.steampowered(.)com/installer/steamcmd.zip)

Now, that SteamCMD is ready, we will begin installing the server.

First, you start off by logging in. Type this command in the command prompt that is currently open:

The command prompt should return this information:

After logging in, you have to determine the path where the server will be installed.
To do this, use this command:

If you want to set the path to something further than just the C:\ drive, then type out the path carefully, and make sure it contains no spaces, otherwise it will make seperate folders.

To install the Garry’s Mod files, type the following command in the prompt:

If you have quite slow internet, then this process could take about half an hour. Fast internet however can do this quickly in just a few minutes.

4020 is the ID of «Garry’s Mod Dedicated Server», not to be confused with 4000, which is the AppID of the game Garry’s Mod itself. http://steamdb.info/app/4020/

To add other game content to your server(e.g:TF2, DoD:S etc.), you have to use the app_update command again. You just have to change the ID 4020 to the ID of the game you want to mount, and change the force_install_dir as well (I recommend making a folder inside the server folder which you install it into). However, it is very likely that these install possibilities do not allow anonymous login. In this case, you have to login with your steam username and password.

Mostly copied from the valve developer wiki, only because it’s fairly useful material.
Only useful for updating your server.
You can also automate this process. There are 2 ways to do that:

Run the commands all at once:

+app_update 4020 validate +quit

If you are logging in with an account, use username password instead of «anonymous» at the +login command.

Then run this script with the +runscript command in SteamCMD:

Okay, our server is now installed. Now, we have to configure it, to make it fully work, and to keep things organized.
First thing you should do, is to configure the server.cfg file. This file is used to set the Sandbox limits, and to set all console commands that are getting automatically executed when the server is booting up.

This file is located here: drive name:/Program Files(x86)/yourfilepath/blah/steamcmd/garrysmod/cfg

An example of a server.cfg file would look like this:

//The lines are used to make big spaces, since using blank spaces does not work in Steam. Replace the lines with blank spaces, or press «TAB» around 6 times to make a big space.
«hostname»———————————————«My Garry’s Mod Sandbox Server»
«rcon_password»————————————-«serveradmin»
«sbox_noclip»——————————————«1» //Enables noclip
«sbox_maxprops»————————————«500»
«sbox_maxeffects»————————————«15»
«sbox_maxemitters»———————————«13»
«sbox_maxthrusters»———————————«30»
«sbox_maxsents»————————————«35»
//etc.
«sbox_playershurtplayers»————————-«1» //Enables PVP Damage
//And you can put in some different console commands which you want to be «autoexecuted»

(guys, just a note, you don’t have to necessarily use this one, it’s just an example :p
the minuses are there because you can’t have more than one space in a row in Steam, afaik. The spaces will work fine in any text editing program.)

Formated in a table:

An unconfigurated server.cfg file only contains 3 blank lines.

For better security, I recommend to put the RCON password into the parameter line of your srcds.exe shortcut with +rcon_password password.

To run your server, you must exit the «garrysmod» folder,and make a shortcut of the srcds.exe file.
Then, right click on the srcds.exe shortcut, click on «Properties», and enter this command line in the parameter line:

And then add the commands after it.
(Unfortunately I couldn’t change the language of Windows to English, becuase I don’t have the appropriate Windows 7 edition for that.)

Double-click the shortcut, and the server should run smoothly.

Simply doing these steps is not enough. The server seems to run, and you are able to join, but something else is missing. The server will not respond to your friends. When they try to join by joining your game, it will kick them because they «failed after 4 retries». This is because nobody but you, at the moment, has the permission to connect to your host. Port forwarding will not make your router settings accessible from anywhere, it will only make it possible for everyone to join your server, which is hidden behind a router wall.

What you have to do in steps:

1. Go to your desktop and open up your start menu.
2. Search for «cmd» in the search bar. A command prompt should open.
3. In the command prompt, type «ipconfig» and press ENTER.
4. A list of IPs, IDs and whatnot should appear. Search the «Ethernet Adaptor LAN» section.
5. When you found it, look up the Standard Gateway of that section, and remember it in any way.
6. Open up your web browser, type in the default gateway into the URL bar, and press enter. A login screen should appear, either a windows screen or a website login page.
7. Enter the login information for your router. If you don’t know the information, ask anyone who knows it or might know it, or look it up on your router box. If possible, use the default login «admin», for username and password.
8. Set up the port forward. For this, find a section for forwarding ports (it’s different on all router pages), and fill in all required values and information. You can set the Service Port as 27015-27016(Use 27015 only if only one port is required), the IP Address your IPv4 Address, and the Protocol «Any» or «All» or «TCP/UDP» (Again, depending on your router page).
9. Start up the port forward, and you’re done.

This step is entirely optional, it is not crucial for making anything work about your server. Setting up a static IP address is explained below.

Open up your command prompt, and run the command «ipconfig /all» without the quotes. Then, search the IPv4 Address of the Ethernet-Adaptor LAN Area or something like that, the Subnet Mask, and the Default Gateway. We will use this information later.

Next, open your start menu, and click on «Control Panel». Then, search the «Network and Internet» entry, and click on the button which should say something like «Show Network status».

After this, right click on «LAN-Connection», and then click on «Properties».
You should see a list of which Elements your connection uses. Double-click «Internet Protocol Version 4», and you should enter the IP Settings of it. After you have done this all, tick «Use the following IP-Address». Doing this should automaticly tick «Use the following DNS-Serveraddress:»
The IP-Address you insert is the static one. It should be very similiar to your actual IP address. Let’s say, your actual IP address is 192.168.2.255 (see what I did there?). In the box, you type in 192.168.2.248.
The Subnet Mask is the one you got from your ipconfig. Same with the Standard Gateway.
Now, you have to fill out the DNS Server addresses. To get the ones you need, you can log into your Router’s Webpage, and then view the Stats of your router. There should be an entry somewhere for DNS Servers.

To make it simple and clear, I listed up the steps you have to do to add workshop addons for your server:

An authkey is required to make +host_workshop_collection work. You can get one here.
You can use anything as the domain name.

You need to add the authkey to the parameter line as well. To do this, use this parameter:

Well, the addons might be on your server now, but all addons that have their own content will show error signs and checkerboard textures, and missing sounds, if the player doesn’t have the addon installed on their client. So we need to force a download of their content, in a way which will be explained below.

This is a list of the most commonly used and useful console commands which can be used to manage and configure your server to your likings.

That was all (or well, most) stuff I know about hosting a Garry’s Mod Server. If something went wrong during installing the server, then you can ask in the comments, and I, or someone else, can maybe help you solve the problem.

Italic = Question
Bold = Answer

What is the Parameter Line?
The Parameter Line is the «Target» line you have to type the parameters in.

IT IS NOT WORKING
That isn’t even a question, but well. If it doesn’t work, then point out WHAT doesn’t work, and I, or maybe someone can help you.

When I run app_update 4020 validate, it says «no subscription» and refuses to install the app. How do I fix that?
You have to log in anonymously by running the command «login anonymous» to make it work. You seem to have forgot to do this.

When I try to install the app, I get error «Error! App ‘4020’ is x after update job.» What does that mean?
That means, that the directory you determined with force_install_dir seems to be invalid. It may not be your client GMod directory, use a completely different one, and make sure it contains no spaces(this shouldn’t actually cause this error, but just to be safe, do not put any spaces into your directory). I recommend to use a completely new directory just for your server, to keep everything clean.

I get this error: [ERROR] lua/autorun/addons.lua:1: attempt to call field ‘AddWorkshop’ (a nil val
ue) when I make my lua file for downloading workshop content. What can I do about that?
Make sure the lua file is located in lua/autorun/server of your server files, and that you use «resource.AddWorkshop( «id» )» for marking all the workshop addons you want to be downloaded by the players.

My server is running, and I forwarded the port, but my friends still cannot join!
Seems like you port forwarded incorrectly. You can «experiment» with the values, try changing them a little, and it might work. I had this problem too, and I fixed it by doing this. Also, make sure that your Firewall is disabled. This isn’t required for everyone, but you should try disabling it.

Источник

Стим клиент для гаррис мод

Данная коллекция видоизменяет Garry`s Mod так, чтобы он был похож на Escape from Tarkov =)

Here it is! The official Prone Mod extension to the wiltOS Animation Base, for use with Prone Mod

Man these dances sure look familiar huh..

These are a collection of Familiar Dance animations ported by wiltOS Technologies. They are being reworked animations to fit the gmod skel.

This is the Action Half-life integrated animation extension.

The register for this addon is as follows:

Lee Enfield ha more like lil Enfield

-INS2 Attachments (yes you can use 8x scope)
-It’s smol
-Hand may clip through bigger sights
-The gun may clip through your face when ads shooting

I upscaled buildings, refinery and skybox coast mutain model. Now they have bigger resolution and they are more detaild and sharper. It’s not perfect, but AI did it’s job well.

I upscaled vehicles, Now they have bigger resolution and they are more detaild and sharper. It’s not perfect, but AI did it’s job well.

Includes:
27 upscaled vehicles

Credits :
— DICE : Original models
— Vad36 : porting the models to the Source Engine
— Steinman78 : making them as player models.

Q: Why replace CW 1.0 on the workshop? Why not keep CW 1.0? Why not make it an update? Why are there so few weapons.

This is Customized Weapons addon optimized for Darkrp.

Requires CS:S content.

You can remove some weapons from your server, just delete folders with it =)

Contains 22 CS:S weapons, and 4 extra weapons.

I don’t support this addon anymore. You ca.

A tool that allows easy animation playback for all entities that have animations. This will not work on Left 4 Dead 1 and 2, Portal 2, CS:GO models, it’s a problem with Garry’s Mod, not this mod.

Please note that not all models have animations. This too.

An improved bodygroup tool, also supporting skins! And it works on effects too!

Right/Left click on an entity to select it.
Reload to select yourself

If the entity is highlighted with halo effect, then open context menu and ma.

A handy tool for server owners and mappers to easily create Navigation Mesh for maps for Nextbot NPCs to use.

It’s the playermodel selector from Sandbox. but better! And available everywhere!

Like your playermodel? Want to easily use it in all gamemodes? Annoyed that nowadays even maps overwrite it and block the spawnmenu? Then stop reading, you’re in the rig.

Reupload without access from authors of addon is restricted.

Half-Life 2
Half-Life 2 Episode 1
Half-Life 2 Episode 2
Counter-Strike: Source

This is my first map on creation of which i spent a total of about 2 years, because the map was redone from scratch several times
This map i.

This is a simple addon that replaces the sounds from the main menu from the ones from Escape From Tarkov. I didn’t make anything with sounds.

This addon adds 10 new medicine entities from Escape From Tarkov, as well as new character effects.

All credits go to Battle state games for creating the models and textures and sounds.

Use for your servers if you want.

Contains around 90% of Escape from tarkov barter items, majority of medical items and majority of containers.

This addon adds a new sub-menu available in the Context Menu, named »Gestures». Clicking any option will make you perform a Gesture, like dancing, or agreeing.

You can alternatively use chat commands to trigger them:

— /gmc_dance (Normal Dance).

Big Overhaul of the Half-Life 2 props that comes with Garry’s Mod.

Big Overhaul of the Half-Life 2 props that comes with Garry’s Mod.

Big Overhaul of the Half-Life 2 props that comes with Garry’s Mod.

so with this addon you will hide all player names on Client-side
i think you can use it on FULL RP server

you can still get names on serverside

add it to ur server low nagruzka koro4e da

this can break some other sh*t on ur server so test it before use in public

JMod is a content pack aimed at providing fun tools and weapons for sandbox and any other gamemode where appropriate. It can also be used in conjunction with other addons, since the crafting system can be configur.

Please do not bother the previous developers as they don’t want anything to do with it.

[Feel free to add me if you wanna help with translating the addon]

This addon will add ambient and combat based music to Garrysmod.
The Ambient music will be played when you have no combat with any npc but when combat between you and an npc erupts then the music will shift to combat.

This extension pack adds OST & soundtracks by geneburn from Escape from Tarkov.

Provided by the Obamium Research Facility, Obamium has been brought to Garry’s Mod for virtual research purposes.

Please proceed with and use Obamium with caution.

Follow my workshop if you enjoyed this mod!

I present to you VOX mod, which adds more than 300+ (352) BEAR PMC voicelines, extracted from EFT (Escape From Tarkov).
Every action at this list contains multiple variants (radial menu and voice lines):

Give those tired legs a break and go prone!

fictional gun from fat man cries 5 country road edition

«A weapon isn’t good or bad, depends on the person who uses it.”
— Jet Li

«I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
— Clint Eastwood

Please stop using this addon. Get Gunsmith Offensive instead.

Join the OFFICIAL Discord server here: https://.

bullpups are still poo and you cant change my mind

imagine manually aligning all those sights for every weapon

«It’s a hell of a thing; killin’ a man. You take away everything he ever had and ever would have.»
— Clint Eastwood

42 weapons. 247 attachments. The customization you crave. The quality you demand.

you have no idea how painful the model hacking process was

«First, do not be detected. If you are detected, do not be acquired. If you are acquired, do not be hit. If you are hit, do not be penetrated. If you are penetrated, do not be killed.»
— «The Defense Onion»

It’s not quite the Modern W.

tripods are for weaklings

Adding better foliage for Garry’s Mod

Volkolak
Composing, porting, modeling, texturing, textures upscaling, compiling

EA DICE
Models and textures source

Simple HUD you can use.
Compatible with TFA, FAS:2, CW2, and ArcCW (arccw hud editting funcs will work on this)
Will also show JMod equipment in the top-left.

Options are found in Options > Bored HUD

Just a simple sprint mod, it drains stamina when you run, jump, and swim underwater. If you have no stamina, you can’t jump or sprint, and you will start to drown when you’re underwater (10 damage per second).

Stamina regenerates when you’re not doing a.

This is the official FA:S 2.0 SWEPs pack that I worked along with the developers of the mod, to make sure that it matches their tastes.
The.

First Perso Death Mod keeps you in first person view when killed. It also spawns a server side ragdoll with which players can play.

It aims to be really simple and shouldn’t have conflicts with other addons. I hope.

The following variables can be m.

Hi everyone,this is Shell and my 3rd addon,hope you like it!XD

Introduction
This is an addon which can display Lens Flare when you face the sun.I just made the new effects and changed the script a bit.

Q&A
Q:The sun is over-bright for me,how to.

Content made by me (basically a small part of the PMK project).

Additional content for Particle Enhancer.

yeAh leT’s mAKe a aUtomAtiC riFLe thAt shOoTs 12.7mm

-Compressed file size: 20.6 MB
-This animation set is like a month old so forgive the pi ss quality

-INS2 Attachments
-Flash Light

Adds flavor animations for some events.
Requires VManip

Adds picking stuff up manually, including base entities and any weapon
Side note: The yellow halo effect is off by default. See below if you want to enable it
Requires VManip

From Dangerman Industries, our latest item; a GSI-XMP9 9mm submachine gun; combing 9mm submachine gun firepower with AR-15 familiarityand operation, this next-generation versatile and mulitasking weapon is suitable for any mission

ArcCW Base and [ArcCW.

ArcCW
Battlefield 4 AS-VAL

Ay, my first workshop addon! HUGE THANKS TO LITERALLY EVERYONE IN THE ARCCW DISCORD, WOULDN’T HAVE BEEN ABLE TO DO THIS WITHOUT YOU GUYS!
Biggest thanks goes to Mazima Gofo for fixing the rig, hands and reload for me.
Thank.

From Dangerman Industries, our latest item; a Kalish-A47 7.62x39mm assault rifle (AKM); The most infamous weapon in modern history gets an ArcCW upgrade; suitable for covert operations behind enemy lines

ArcCW Base and [ArcCW] FA:S1 Reanimated required.

Источник