ora 01810 код формата появляется дважды
ORA-01810: код формата появляется дважды
Почему sql ниже генерирует ошибку ORA-01810? Я исследовал эту ошибку и использую разные форматы дат для каждой вставки даты
2 ответа
Я хочу заменить час на дату, например, если у меня есть 07/07/13 11:15, я хочу получить 07/07/13 00:00 с первого свидания. Итак, я пытаюсь сделать вот что: textDate := TO_CHAR (auxDate, ‘DD/MM/RR’)||’ ‘||textHour||’:’||textMin; endDate := TO_DATE(textDate, ‘DD/MM/RR hh:mm’); Когда я запускаю SP.
TO_TIMESTAMP(‘20151206 00:00:00’, ‘yyyymmdd hh:mm:ss’)
Это неправильно в двух отношениях:
1. Неверный код формата
2. Неправильная часть времени
24-часовой формат:
Нет времени.:
Вы дважды использовали код формата mm в TO_TIMESTAMP(‘20151206 00:00:00’, ‘yyyymmdd hh:mm:ss’)
Пожалуйста, ознакомьтесь со списком моделей формата даты для получения дополнительной информации.
Похожие вопросы:
я хочу преобразовать дату в какой-то другой формат. Ниже приведен пример с 04/03/10 09:00:50.000000000 AM по YYYYMM Я не могу получить это, ниже приведен запрос, который я использовал для.
INSERT INTO RENT_CONTRACT VALUES (‘123456789′,’201213′,’20123444′,100,1,’ 2014-01-07 ‘); Я пытаюсь вставить этот кортеж в свою таблицу rent_contract, но эта ошибка: ORA-01861: литерал не.
В моей функции oracle у меня есть переменная типа TIMESTAMP. Я извлекаю значение xml и преобразую его в timestamp, но возникает эта ошибка. Я даю код и пример ввода. Сначала я объявляю переменную.
Я хочу заменить час на дату, например, если у меня есть 07/07/13 11:15, я хочу получить 07/07/13 00:00 с первого свидания. Итак, я пытаюсь сделать вот что: textDate := TO_CHAR (auxDate.
Мне нужна помощь ребята с этой ошибкой > ORA-01830: изображение формата даты заканчивается перед преобразованием всей входной строки INSERT INTO members_contributions (contribution_type, from_date.
Я проверяю некоторые даты и запросы с помощью jdbctemplate и получаю следующую ошибку. // creating a LocalDate object with specific date & time LocalDate date =.
Я новичок в sql.I и пытаюсь получить записи между двумя датами. Но я получаю ошибку ORA-01810 Запрос: SELECT txnid as txnid, to_date(txn_date,’YYYY-MM-DD HH24:MI:SS’) as txn_date, amount as amount.
Oracle / PLSQL: ORA-01810 Error Message
Learn the cause and how to resolve the ORA-01810 error message in Oracle.
Description
When you encounter an ORA-01810 error, the following error message will appear:
Cause
You tried to use the TO_DATE function in a query, but you used a format code twice in the date format.
Resolution
The option(s) to resolve this Oracle error are:
Option #1
Re-write the TO_DATE function so that you only use each format code once. Examples of format codes are:
| Format Code | Explanation |
|---|---|
| YEAR | Year, spelled out |
| YYYY | 4-digit year |
| MM | Month (01-12; JAN = 01). |
| MON | Abbreviated name of month. |
| MONTH | Name of month, padded with blanks to length of 9 characters. |
| D | Day of week (1-7). |
| DAY | Name of day. |
| DD | Day of month (1-31). |
| DDD | Day of year (1-366). |
| DY | Abbreviated name of day. |
| HH | Hour of day (1-12). |
| HH12 | Hour of day (1-12). |
| HH24 | Hour of day (0-23). |
| MI | Minute (0-59). |
| SS | Second (0-59). |
| SSSSS | Seconds past midnight (0-86399). |
For example, if you tried to execute the following SELECT statement:
You would receive the following error message:
Some people mistakenly use the MM format code to represent minutes, thus using the MM format for both the months and the minutes.
You could correct this SELECT statement as follows:
Проблемы с датой/временем
Пишу приложение на C# c WinForms NET Framework 4.
Привожу запрос на вставку записи в таблицу «ZAKAZ», все переменные проинициализированны, но остается вопрос только с датой/временем, похоже не того формата получается:
вообщем, выдает ошибку ORA-01830: date format picture ends before converting entire input string
вот сам код запроса на C# и SQL:
Помощь в написании контрольных, курсовых и дипломных работ здесь.
Проблемы с датой и временем.
Situatciya: Baza Access2000, pole tipa Date/Time (format General Date), v sisteme ystanovleno v.
Вычислить промежуток времени между текущей датой/временем и временем, введенным пользователем
Создайте новое приложение. Пакет приложения назовите com.ВАШЕ_ИМьЯ.time_span. Функционал.
Поле с датой и временем.
Сейчас у меня есть поле в таблице типа варчар пример ‘02.02.2006 4:52:58’ эсейчас выборку типа.
Строка с датой и временем
Здравствуйте. Есть строка «YYYY-MM-DDTHH:MM:SS GMT» Как из неё извлечь дату и время и перевести в.
Ну что я могу вам сказать.
В меру моего понимания ты пытаешся запихнуть значение в неверном формате, который по умолчанию не подходит.
Помощь в написании контрольных, курсовых и дипломных работ здесь.
Работа с датой и временем
Подскажите пожалуйста как реализовать следующую вещь: bat создаёт папку с датой и временем и.
Работа с Датой и Временем
Всем привет, помогите решить задачи с датой и временем, ни когда не с сталкивался еще с этим и не.
Работа со временем и датой
Помогите, при добавлении нового элемента время изменяется на время последнего добавления class.
Арифметика с датой и временем
Подскажите плс. как мне в отчете отнять от имеющегося времени 5 минут
Ora 01810 код формата появляется дважды
This section lists messages generated when the Oracle date function is accessed.
ORA-01800: a literal in the date format was too large to process
Cause: A literal specified in a date format was too large. If a literal is entered as a date, it must be less than 220 characters long.
Action: Use only literals less than 220 characters long in the date format.
ORA-01801: date format is too long for internal buffer
Cause: The date format string was too long to process. This should occur only if several long literals are specified as part of a date.
Action: Remove long literals from the date format string.
ORA-01802: Julian date is out of range
Cause: An invalid Julian date was entered. Valid Julian dates run from 1 to 3,442,447.
Action: Enter a valid Julian date between 1 and 3,442,447.
ORA-01803: failure in getting date/time
Cause: This is an internal error message that is not likely to occur. It is usually caused by a failure in the system clock.
Action: Investigate the system clock and the process that requested the date or time. If necessary, contact customer support.
ORA-01810: format code appears twice
Cause: A format code was listed twice in a date specification. Each format code may be specified only once in the function TO_DATE.
Action: Remove the duplicate format code from the date specification, then retry the operation.
ORA-01811: Julian date precludes use of day of year
Cause: Both a Julian date and a day of the year were specified in the TO_DATE function. If a Julian date is specified, the day of the year (DDD) may not be specified, as it is contained in the Julian date.
Action: Remove the day of the year or the Julian date from the specification, then retry the operation.
ORA-01812: year may only be specified once
Cause: More than one year format code was listed in a date specification. Only one of the following year format codes may be specified in a date: YYYY, YYY, YY, Y.
Action: Remove all but one year format from the date specification.
ORA-01813: hour may only be specified once
Cause: More than one hour format code was listed in a date specification. Only one of the following hour format codes may be specified in a date: HH, HH12, HH24.
Action: Remove all but one hour format from the date specification.
ORA-01814: AM/PM conflicts with use of A.M./P.M.
Cause: Both types of meridian indicators, AM and PM, were listed in a date specification. If one of the meridian indicator format masks, such as AM or A.M., is specified in the date, the other may not be specified.
Action: Use one meridian indicator format, with or without periods, consistently.
ORA-01813: hour may only be specified once
Cause: More than one hour format code was listed in a date specification. Only one of the following hour format codes may be specified in a date: HH, HH12, HH24.
Action: Remove all but one hour format from the date specification.
ORA-01814: AM/PM conflicts with use of A.M./P.M.
Cause: Both types of meridian indicators, AM and PM, were listed in a date specification. If one of the meridian indicator format masks, such as AM or A.M., is specified in the date, the other may not be specified.
Action: Use one meridian indicator format, with or without periods, consistently.
ORA-01815: BC/AD conflicts with use of B.C./A.D.
Cause: Both types of BC/AD indicators were listed in a date specification. If one of the BC/AD indicator format masks, such as BC or B.C., is specified in the date, the other may not be specified.
Action: Use one BC/AD indicator format, with or without periods, consistently.
ORA-01816: month may only be specified once
Cause: More than one month format code was listed in a date specification. Only one of the following month format codes may be specified in a date: MM, MON, MONTH.
Action: Remove all but one month format from the date specification.
ORA-01817: day of week may only be specified once
Cause: More than one day-of-the-week format code was listed in a date specification. Only one of the following day-of-the-week format codes may be specified in a date: D, DY, DAY.
Action: Remove all but one day-of-the-week format from the date specification.
ORA-01818: HH24 precludes use of meridian indicator
Cause: A date specification contained both a 24-hour time format code and a meridian indicator code. If hours are specified using the 24-hour time format (HH24), a meridian indicator, AM or PM, may not be specified.
Action: Remove the meridian indicator format code, AM/PM or A.M./P.M., or the 24-hour time format code, HH24, from the date specification.
ORA-01819: signed year precludes use of BC/AD
Cause: A date specification contained both a signed year and a B.C./A.D. indicator. If the year is specified with a sign, such as SYYYY, then B.C. or A.D. is implicit in the date and must not be entered.
Action: Remove the B.C./A.D. indicator from the date specification.
ORA-01820: format code cannot appear in date input format
Cause: A date specification contained an invalid format code. Only the following may be specified when entering a date: year, month, day, hours, minutes, seconds, Julian day, A.M./P.M. and B.C./A.D.
Action: Remove the invalid format code from the date specification.
ORA-01821: date format not recognized
Cause: A date specification contained an invalid format code.
Action: Check that only valid date format codes are specified.
ORA-01822: era format code is not valid with this calendar
Cause: An era format code, E or EE, was specified with a calendar which does not use era information.
Action: Retry the operation using a date format mask which does not contain era format codes.
ORA-01830: date format picture ends before converting entire input string
Cause: A valid date format picture included extra data. The first part of the format picture was converted into a valid date, but the remaining data was not required.
Action: Check the specifications for date format pictures and correct the statement.
ORA-01831: year conflicts with Julian date
Cause: The wrong year was specified with a Julian day. If a year is specified with a Julian date, it must be the year in which the Julian date occurs.
Action: Remove the year value from the date specification or enter the correct year for the Julian date.
ORA-01832: day of year conflicts with Julian date
Cause: A Julian date was specified with the day of the year but the day did not correspond to the Julian date. If the day of the year is specified with a Julian date, it must be the same day as the Julian date.
Action: Remove the day of the year value from the date specification or enter the correct day for the Julian date.
ORA-01833: month conflicts with Julian date
Cause: The wrong month was specified with a Julian date. If a month is specified with a Julian date, it must be the month in which the Julian date occurs.
Action: Remove the month value from the date specification or enter the correct month for the Julian date.
ORA-01834: day of month conflicts with Julian date
Cause: A Julian date was specified with the day of the month, but the month day did not correspond to the Julian date. If the day of the month is specified with a Julian date, it must be the same day of the month as the Julian date.
Action: Remove the day of the month value from the date specification or enter the correct day of the month for the Julian date.
ORA-01835: day of week conflicts with Julian date
Cause: A Julian date was specified with the day of the week, but the weekday did not correspond to the Julian date. If the day of the week is specified with a Julian date, it must be the same day of the week as the Julian date.
Action: Remove the day of the week value from the date specification or enter the correct day of the week for the Julian date.
ORA-01836: hour conflicts with seconds in day
Cause: The wrong hour was specified with seconds in the day. If an hour is specified with seconds past midnight (SSSSS), it must be the hour in which the seconds value falls.
Action: Remove the hour value from the date specification or specify the correct hour for the seconds past midnight.
ORA-01837: minutes of hour conflicts with seconds in day
Cause: A date specification contained both minutes of the hour and seconds in the day but the values did not correspond. If both minutes in the hour (MI) and seconds past midnight (SSSSS) are specified, the minutes value must be the minute in which the seconds value will occur.
Action: Remove the minutes value from the date specification or enter the correct minute value for the specified seconds value.
ORA-01838: seconds of minute conflicts with seconds in day
Cause: A date specification contained both seconds of the minute and seconds in the day but the values did not correspond. If both types of seconds are specified, the seconds of the minute value (SS) must be the second in which the seconds past midnight value (SSSSS) will fall.
Action: Remove the seconds of the minute value from the date specification or enter a value that corresponds to the given seconds in the day.
ORA-01839: date not valid for month specified
Cause: The day of the month specified in the date is invalid for the given month. The day of the month (DD) must be between 1 and the number of days in the month.
Action: Enter a valid day of the month for the specified month.
ORA-01840: input value not long enough for date format
Cause: The data to be converted to date format was incomplete; the date format picture was longer than the input data.
Action: Either add more input or shorten the date picture format, then retry the operation.
Cause: A date specified a year that is not in the valid date range. A valid date is any date between January 1, 4712 B.C. and December 31, 4712 A.D.
Action: Enter a valid date value between 4712 B.C. and 4712 A.D.
ORA-01842: quarter must be between 1 and 4
Cause: An invalid value was specified for the quarter of the year in a date. The quarter (Q) must be between 1 and 4.
Action: Enter a value for quarter between 1 and 4.
ORA-01843: not a valid month
Cause: A date specified an invalid month. Valid months are: January-December, for format code MONTH, and Jan-Dec, for format code MON.
Action: Enter a valid month value in the correct format.
ORA-01844: week of year must be between 1 and 52
Cause: An invalid value was specified for the week of the year in a date. Week of the year (WW) must be between 1 and 52.
Action: Enter a week of the year value between 1 and 52.
ORA-01845: week of month must be between 1 and 5
Cause: An invalid value was specified for the week of the month in a date. Week of the month (W) must be between 1 and 5.
Action: Enter a week of the month value between 1 and 5.
ORA-01846: not a valid day of the week
Cause: A date specified an invalid day of the week. Valid days are
Action: Enter a valid day of the week value in the correct format.
ORA-01847: day of month must be between 1 and last day of month
Cause: The day of the month listed in a date is invalid for the specified month. The day of the month (DD) must be between 1 and the number of days in that month.
Action: Enter a valid day value for the specified month.
ORA-01848: day of year must be between 1 and 365 (366 for leap year)
Cause: An invalid day of the year was specified in a date. Day of the year (DDD) must be between 1 and 365 for a non-leap year or 1 and 366 for a leap year.
Action: Enter a day of the year value between 1 and 365 (or 366).
ORA-01849: hour must be between 1 and 12
Cause: An invalid hour was specified for a date using the 12-hour time format. If a 12-hour format code (HH or HH12) is used, the specified hour must be between 1 and 12.
Action: Enter an hour value between 1 and 12.
ORA-01850: hour must be between 0 and 23
Cause: An invalid hour was specified for a date using the 24-hour time format. If the 24-hour format code (HH24) is listed, the specified hour must be between 0 and 23.
Action: Enter an hour value between 0 and 23.
ORA-01851: minutes must be between 0 and 59
Cause: An invalid minute value was specified in a date. Minutes must be between 0 and 59.
Action: Enter a minute value between 0 and 59.
ORA-01852: seconds must be between 0 and 59
Cause: An invalid seconds value was specified in a date. Seconds must be between 0 and 59 if the seconds format code (SS) is used.
Action: Enter a seconds value between 0 and 59.
ORA-01853: seconds in day must be between 0 and 86399
Cause: An invalid value for seconds in the day was specified in a date. Seconds must be between 0 and 86399 if the seconds past midnight format code (SSSSS) is used.
Action: Specify a seconds value between 0 and 86399.
ORA-01854: Julian date must be between 1 and 5373484
Cause: An invalid Julian date was entered.
Action: Correct and retry.
ORA-01855: AM/A.M. or PM/P.M. required
Cause: A date specification contained a meridian indicator format code but a valid meridian indicator was not specified. If a meridian indicator code, A.M./P.M. or AM/PM, is included in a date format, the date must include a valid meridian indicator.
Action: Specify the meridian indicator in the correct format, A.M./AM or P.M./PM.
ORA-01856: BC/B.C. or AD/A.D. required
Cause: A date specification contained a BC/AD format code but a valid BC/AD indicator was not specified. If one of the BC/AD format codes, BC/AD or B.C./A.D., is specified in a date format, the date must include BC/B.C. or AD/A.D.
Action: Specify the BC/AD indicator in the date using the correct format.
ORA-01857: not a valid time zone
Cause: An incorrect time zone code was specified for the NEW_TIME function.
Action: Correct the invalid time zone code, then retry the operation.
ORA-01858: a non-numeric character found where a digit was expected
Cause: The input data to be converted using a date format model was incorrect. The format model expected a number but found a non-numeric character.
Action: Check the input data and the date format model to make sure the elements match in number and type, then retry the operation.
ORA-01859: a non-alphabetic character was found where a letter was expected
Cause: The input data to be converted using a date format model was incorrect. The format model expected a letter but found a non-alphabetic character.
Action: Check the input data and the date format model to make sure the elements match in number and type, then retry the operation.
ORA-01860: week of year must be between 1 and 53
Cause: A week number outside the range 1 to 53 was specified.
Action: Use only a value within the valid range for the week number.
ORA-01861: literal does not match format string
Cause: Literals in the input string must be the same length as the literals in the format string, except for the leading white space characters. If the «FX» modifier is specified, the literal must match exactly, including the leading white space.
Action: Correct the format string to match the string literal.
ORA-01862: wrong number of digits for this format item
Cause: The number of digits in this format item is not equal to the number required for the format. This error usually occurs when the «FX» modifier (format exact) has been specified.
Action: Resubmit the command using the required amount of numbers for the format mask.
ORA-01863: the year is not supported for the current calendar
Cause: The year is not supported for the current calendar.
Action: Please check the documentation to find out what years are supported for the current calendar.
ORA-01864: the date is out of range for the current calendar
Cause: Your calendar does not extend to the specified date.
Action: Specify a date which is legal for this calendar.
ORA-01865: not a valid era
Cause: Era input does not match a known era.
Action: Provide a valid era on input.
ORA-01898: too many precision specifiers
Cause: While trying to truncate or round dates, extra data was found in the date format picture.
Action: Check the syntax of the date format picture and retry.
ORA-01899: bad precision specifier
Cause: An invalid precision code was specified in a date.
Action: Enter a valid precision code in the date format. Valid precision types are: century, year, month, day, Julian date, hours, minutes, and seconds.
Ora 01810 код формата появляется дважды
SELECT TRIGGER_NAME
FROM USER_TRIGGERS
WHERE UPPER(TRIGGER_NAME) = UPPER(‘XXX’)
/
where XXX is your trigger name.
SY.
 Re: ora-04098 [new] | |
| Tany Guest | ���� ���, �� ���� ������� ������ ���� ���� �������. |
| 24 ��� 03, 19:24����[431300] �������� | ���������� �������� ���������� | |
| Re: ora-04098 [new] | |
| Markelenkov Member ������: | ��� ���� ������ select * from all_triggers where table_name=. ��� ���� ������ select * from all_errors? |
| 24 ��� 03, 20:16����[431354] �������� | ���������� �������� ���������� | |
| Re: ora-04098 [new] | |
| Tany Guest | � ������ ��������� ���� ����� ������� � ��� ��� ��� ������, ��� � ����. � ������ ������ ������� ��������� ����� �������� ���. |
| 25 ��� 03, 12:36����[432047] �������� | ���������� �������� ���������� | |
| Re: ora-04098 [new] | |
| SY Member ������: Middlebury, CT USA | Well, then most likely you have the following: 1. Trigger is referencing another object like package, procedure, function, view. Assume object name is X. 2. Someone drops object X, which invalidates the trigger. 3. Same or another user issues a DML which needs to fire the trigger. Oracle realizes trigger is invalid and recompliles it on the fly. However, since X is dropped, trigger remains invalid and ORA-04098 is raised. 4. Same or another user issues recreates object X. Trigger is still invalid. 5. Same or another user issues a DML which needs to fire the trigger. Oracle realizes trigger is invalid and recompliles it on the fly. And, since X is recreated, trigger compiles OK. 5. You notice ORA-04098 in llog/trace, check the trigger and it is perfectly valid. Below is an example: Also, it could be result of regranting privileges. Assume object X is owned by a different user and trigger owner has EXECUTE on X. Then same scenario as described above, just revoke/regrant EXECUTE on X instead of dropping/recreating X will produce same results.
|