как установить sinutrain на windows 10
SinuTrain for SINUMERIK Operate 4.8 Ed.2
Version info and download
Please read the system requirements, support notes and other information on this page before downloading. Language packs for this version can be found at the bottom of this page.
SinuTrain for SINUMERIK Operate V4.8 Ed.2
Info about version 4.8 Ed.2
Technical requirements
Disc capacity approx. 3,3 GB full installation
Graphics card: DirectX 9 or higher with WDDM 1.0 driver, minimum resolution 800 * 600 pixels
MS Windows 7 SP1 (32- and 64-Bit | not supported: Starter, Web Edition and Embedded)
MS Windows 8.1 (32- and 64-Bit | not supported: RT Edition)
MS Windows 10 (64-Bit | not supported: Mobile and Mobile Enterprise)
User profile settings
In order to install and start up SinuTrain, you must have administrator rights.
Features of the Basic version (free use without license)
The usage and scope of functions provided by the various template machines depends on the availability of a license. Without a license, only the functions of SinuTrain Basic are available.
You do not require any license for the «DEMO turning machine» template machines (1-channel, 3-axis machine with main spindle and driven tool spindle) and «DEMO milling machine» (1-channel, 3-axis machine). You can, for example, transfer workpieces and part programs to the machine for program simulation and customization, and then from the machine for further use on CNCs.
For more information about the licenses, refer to the Help of SinuTrain.
You can find the copyright information for third-party software contained in this product, particularly open source software, as well as applicable licensing terms of such third-party software in the ReadMe_OSS document
Special information for resellers
The information and the license terms in the ReadMe_OSS document must be passed on to the purchasing party to avoid license infringements by the reseller or purchasing party.
Availability of Source Code
Certain license conditions of third-party software components used in this product may require Siemens to provide you with the source code and additional information for such components. In most cases, Siemens provides this information on or with the device. In case Siemens is technically unable to do so, you may request a copy of of this OSS source code against payment of shipping and handling charges. Please send your request to the address provided at the end of this section.
SinuTrain for SINUMERIK Operate 4.7 Ed.4
Version info and download
Please read the system requirements, support notes and other information on this page before downloading. Language packs for this version can be found at the bottom of this page.
SinuTrain for SINUMERIK Operate V4.7 Ed.4
Info about version 4.7 Ed.4
System requirements
Disc capacity approx. 3,3 GB full installation
Graphics card: DirectX 9 or higher with WDDM 1.0 driver, minimum resolution 800 * 600 pixels
MS Windows 7 SP1 (32- and 64-Bit | not supported: Starter, Web Edition and Embedded)
MS Windows 8.1 (32- and 64-Bit | not supported: RT Edition)
MS Windows 10 (64-Bit | not supported: Mobile and Mobile Enterprise, S versions)
User profile settings
In order to install and start up SinuTrain, you must have administrator rights.
Features of the Basic version (free use without license)
The usage and scope of functions provided by the various template machines depends on the availability of a license. Without a license, only the functions of SinuTrain Basic are available.
You do not require any license for the «DEMO turning machine» template machines (1-channel, 3-axis machine with main spindle and driven tool spindle) and «DEMO milling machine» (1-channel, 3-axis machine). You can, for example, transfer workpieces and part programs to the machine for program simulation and customization, and then from the machine for further use on CNCs.
For more information about the licenses, refer to the Help of SinuTrain.
You can find the copyright information for third-party software contained in this product, particularly open source software, as well as applicable licensing terms of such third-party software in the ReadMe_OSS document
Special information for resellers
The information and the license terms in the ReadMe_OSS document must be passed on to the purchasing party to avoid license infringements by the reseller or purchasing party.
Availability of Source Code
Certain license conditions of third-party software components used in this product may require Siemens to provide you with the source code and additional information for such components. In most cases, Siemens provides this information on or with the device. In case Siemens is technically unable to do so, you may request a copy of of this OSS source code against payment of shipping and handling charges. Please send your request to the address provided at the end of this section.
SinuTrain for SINUMERIK Operate 4.93
Version info and download
Please read the system requirements, support notes and other information on this page before downloading.
SinuTrain for SINUMERIK Operate V4.93
Info about version 4.93
Technical requirements
approx. 3.3 GB full installation
approx. 1.2 GB minimal configuration (english only)
Additional memory is required for creating your own machines. The printing of NC programs is possible on all graphic-capable printers set up on the operating system.
Graphics card: DirectX 9 or higher with WDDM 1.0 driver, minimum resolution 800 * 600 pixels
MS Windows 10 (64-Bit | not supported: Mobile and Mobile Enterprise, S editions)
User profile settings
In order to install and start up SinuTrain, you must have administrator rights.
Features of the Basic version (free use without license)
The usage and scope of functions provided by the various template machines depends on the availability of a license. Without a license, only the functions of SinuTrain Basic are available.
The Basic version comes with two template machines:
You do not require any license for the «DEMO turning machine» template machines (1-channel, 3-axis machine with main spindle and driven tool spindle) and «DEMO milling machine» (1-channel, 3-axis machine). You can, for example, transfer workpieces and part programs to the machine for program simulation and customization, and then from the machine for further use on CNCs.
For more information about the licenses, refer to the Help of SinuTrain.
You can find the copyright information for third-party software contained in this product, particularly open source software, as well as applicable licensing terms of such third-party software in the ReadMe_OSS document
Special information for resellers
The information and the license terms in the ReadMe_OSS document must be passed on to the purchasing party to avoid license infringements by the reseller or purchasing party.
Availability of Source Code
Certain license conditions of third-party software components used in this product may require Siemens to provide you with the source code and additional information for such components. In most cases, Siemens provides this information on or with the device. In case Siemens is technically unable to do so, you may request a copy of of this OSS source code against payment of shipping and handling charges. Please send your request to:
Tel.: +49 911 895 7222
Further information and support for SinuTrain
Up-to-date information, FAQs and service information are available on the Siemens Service and Support portal (http://support.automation.siemens.com). Please enter «SinuTrain» in the field «Product or article no.» and then select the appropriate version from the list. If the information provided does not help you, you will find support tailored to your case under «Support Request». For this you have to log in or register.
Download the software, language packs
Before downloading you will be asked for your login.
You do not have a login for the CNC4you download area or for the SINUMERIK Trainer Community? After clicking on the download link you can register directly. You will then receive an e-mail to confirm your e-mail address.
SinuTrain for SINUMERIK Operate 4.5 Ed.3
Version info and download
Please read the system requirements, support notes and other information on this page before downloading. Language packs for this version can be found at the bottom of this page.
SinuTrain for SINUMERIK Operate V4.5 Ed.3
Info about version 4.5 Ed.3
Technical requirements
Disc capacity approx. 3,3 GB full installation
Graphics card: DirectX 9 or higher with WDDM 1.0 driver, minimum resolution 800 * 600 pixels
MS Windows 7 Home Basic, Home Premium, Professional, Ultimate, Enterprise (32- and 64-Bit)
MS Windows 8.1, MS Windows 8.1 Pro, Enterprise (32- and 64-Bit)
MS Windows 10 (64-Bit, Mobile and Mobile Enterprise are not supported)
To use SinuTrain for SINUMERIK Operate V4.5 Ed.3 with Windows 10 you will need Automation License Manager V5.3 (or higher version)
The installation package for Automation License Manager V5.3 is available for download free of charge.
User profile settings
In order to install and start up SinuTrain, you must have administrator rights.
Features of the Basic version (free use without license)
The usage and scope of functions provided by the various template machines depends on the availability of a license. Without a license, only the functions of SinuTrain Basic are available.
You do not require any license for the «DEMO turning machine» template machines (1-channel, 3-axis machine with main spindle and driven tool spindle) and «DEMO milling machine» (1-channel, 3-axis machine). You can, for example, transfer workpieces and part programs to the machine for program simulation and customization, and then from the machine for further use on CNCs.
For more information about the licenses, refer to the Help of SinuTrain.
You can find the copyright information for third-party software contained in this product, particularly open source software, as well as applicable licensing terms of such third-party software in the ReadMe_OSS document
Special information for resellers
The information and the license terms in the ReadMe_OSS document must be passed on to the purchasing party to avoid license infringements by the reseller or purchasing party.
Availability of Source Code
Certain license conditions of third-party software components used in this product may require Siemens to provide you with the source code and additional information for such components. In most cases, Siemens provides this information on or with the device. In case Siemens is technically unable to do so, you may request a copy of of this OSS source code against payment of shipping and handling charges. Please send your request to the address provided at the end of this section.
SinuTrain for SINUMERIK Operate
Overview and version choice
The control identical programming station for production planning, CNC program creation, and training
Overview
The advantage for workshop operators: More cutting time, fewer risks!
With SinuTrain, one PC is sufficient for part programming, NC program testing, CNC training and employee training. The machine can meanwhile process parts. And each collision risk detected and eliminated in the SinuTrain simulation prevents damage.
SinuTrain versions
Like SINUMERIK Operate, SinuTrain for SINUMERIK Operate is cross-technology. Turning and milling machines are supported, as are turning/milling and milling/turning machines with 3, 3+2 and 5-axis simultaneous technologies in single and multi-channel applications.
Use basic functionality free of charge
For downloading, installing and using the basic functionality of SinuTrain you don’t need a licence. With SinuTrain, the simulation of one standard lathe and one standard milling machine is already available as standard. The ShopTurn/ShopMill user interface is included in SinuTrain for SINUMERIK Operate as well as cycle support via programGUIDE.
Licensing: SinuTrain and the machines of your workshop
If you have several machines with the same SINUMERIK operating version, with the appropriate SinuTrain license you can import the machine data of all these machines into SinuTrain and transfer the programs created on SinuTrain to these machines.
If you want to integrate machines with different SINUMERIK Operate versions into SinuTrain, you need a separate SinuTrain license for each SINUMERIK Operate version.