код события 4001 windows 7

This happens when your wireless network adapter is configured to turn off after a period of inactivity to save power.

It says successful because: It was configured to do so, and it did.
It pops as a warning because: This will result in network dis-connectivity, so if the user does not want it to be this way, he should change the setting.

That’s not stupid, that’s thoughtful on the Microsoft developer’s part for power saving. It’s just that we don’t see it the way it was meant to be.. 🙂
Hope it helps!

I too was receiving this error also, although my setup may be different than the users that have posted here.

I use my Ethernet NIC most of the time and keep my WLAN as a redundant backup in case the wired side drops. I was logging this error whether the adapter was enabled or not, since the service was still active in the Automatic mode.

Upon every boot, I was logging EventId 4001. I was able to keep the WLAN network adapter enabled and eliminate the error by simply switching the WLAN service setting from Automatic to Manual.

If you are using the wireless connection and NOT the Ethernet NIC, I am not sure if this will also work for you (as I have not tried it), but it did solve my error logging issue of the EventId 4001 in my situation, which was annoying me much in the same way as the others here have articulated, since there really is no need for a warning at all IMHO.

I am assuming that upon boot, the wireless service is called to respond ( in the automatic mode), and if there is not active connection, the service then will generate the message when the service is called to stop & listen for another call.

Hope this is of some help to the group, and in either case I am no longer logging the EventId 4001 so it worked for me.

Adminstrative Tools>Services>WLAN Auto Config—> Set to Manual.

Источник

Код события 4001 windows 7

Общие обсуждения

WARNING: Event ID 4001, WLAN AutoConfig service has successfully stopped.

The operative word there being «successfully «, and the stupidity on a Microsoft Developers part being; if it’s stopped successfully they why the ____ does it mess up my event log with a warning flag?

I get fed up of this garbage. Isn’t this why Vista failed so badly? You’d think Microsoft would learn.

Все ответы

This happens when your wireless network adapter is configured to turn off after a period of inactivity to save power.

It says successful because: It was configured to do so, and it did.
It pops as a warning because: This will result in network dis-connectivity, so if the user does not want it to be this way, he should change the setting.

That’s not stupid, that’s thoughtful on the Microsoft developer’s part for power saving. It’s just that we don’t see it the way it was meant to be.. 🙂
Hope it helps!

I too was receiving this error also, although my setup may be different than the users that have posted here.

I use my Ethernet NIC most of the time and keep my WLAN as a redundant backup in case the wired side drops. I was logging this error whether the adapter was enabled or not, since the service was still active in the Automatic mode.

Upon every boot, I was logging EventId 4001. I was able to keep the WLAN network adapter enabled and eliminate the error by simply switching the WLAN service setting from Automatic to Manual.

If you are using the wireless connection and NOT the Ethernet NIC, I am not sure if this will also work for you (as I have not tried it), but it did solve my error logging issue of the EventId 4001 in my situation, which was annoying me much in the same way as the others here have articulated, since there really is no need for a warning at all IMHO.

I am assuming that upon boot, the wireless service is called to respond ( in the automatic mode), and if there is not active connection, the service then will generate the message when the service is called to stop & listen for another call.

Hope this is of some help to the group, and in either case I am no longer logging the EventId 4001 so it worked for me.

Adminstrative Tools>Services>WLAN Auto Config—> Set to Manual.

Источник

Код события 4001 windows 7

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

General discussion

WARNING: Event ID 4001, WLAN AutoConfig service has successfully stopped.

The operative word there being «successfully «, and the stupidity on a Microsoft Developers part being; if it’s stopped successfully they why the ____ does it mess up my event log with a warning flag?

I get fed up of this garbage. Isn’t this why Vista failed so badly? You’d think Microsoft would learn.

All replies

This happens when your wireless network adapter is configured to turn off after a period of inactivity to save power.

It says successful because: It was configured to do so, and it did.
It pops as a warning because: This will result in network dis-connectivity, so if the user does not want it to be this way, he should change the setting.

That’s not stupid, that’s thoughtful on the Microsoft developer’s part for power saving. It’s just that we don’t see it the way it was meant to be.. 🙂
Hope it helps!

I too was receiving this error also, although my setup may be different than the users that have posted here.

I use my Ethernet NIC most of the time and keep my WLAN as a redundant backup in case the wired side drops. I was logging this error whether the adapter was enabled or not, since the service was still active in the Automatic mode.

Upon every boot, I was logging EventId 4001. I was able to keep the WLAN network adapter enabled and eliminate the error by simply switching the WLAN service setting from Automatic to Manual.

If you are using the wireless connection and NOT the Ethernet NIC, I am not sure if this will also work for you (as I have not tried it), but it did solve my error logging issue of the EventId 4001 in my situation, which was annoying me much in the same way as the others here have articulated, since there really is no need for a warning at all IMHO.

I am assuming that upon boot, the wireless service is called to respond ( in the automatic mode), and if there is not active connection, the service then will generate the message when the service is called to stop & listen for another call.

Hope this is of some help to the group, and in either case I am no longer logging the EventId 4001 so it worked for me.

Adminstrative Tools>Services>WLAN Auto Config—> Set to Manual.

Источник

Код события 4001 windows 7

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

General discussion

WARNING: Event ID 4001, WLAN AutoConfig service has successfully stopped.

The operative word there being «successfully «, and the stupidity on a Microsoft Developers part being; if it’s stopped successfully they why the ____ does it mess up my event log with a warning flag?

I get fed up of this garbage. Isn’t this why Vista failed so badly? You’d think Microsoft would learn.

All replies

This happens when your wireless network adapter is configured to turn off after a period of inactivity to save power.

It says successful because: It was configured to do so, and it did.
It pops as a warning because: This will result in network dis-connectivity, so if the user does not want it to be this way, he should change the setting.

That’s not stupid, that’s thoughtful on the Microsoft developer’s part for power saving. It’s just that we don’t see it the way it was meant to be.. 🙂
Hope it helps!

I too was receiving this error also, although my setup may be different than the users that have posted here.

I use my Ethernet NIC most of the time and keep my WLAN as a redundant backup in case the wired side drops. I was logging this error whether the adapter was enabled or not, since the service was still active in the Automatic mode.

Upon every boot, I was logging EventId 4001. I was able to keep the WLAN network adapter enabled and eliminate the error by simply switching the WLAN service setting from Automatic to Manual.

If you are using the wireless connection and NOT the Ethernet NIC, I am not sure if this will also work for you (as I have not tried it), but it did solve my error logging issue of the EventId 4001 in my situation, which was annoying me much in the same way as the others here have articulated, since there really is no need for a warning at all IMHO.

I am assuming that upon boot, the wireless service is called to respond ( in the automatic mode), and if there is not active connection, the service then will generate the message when the service is called to stop & listen for another call.

Hope this is of some help to the group, and in either case I am no longer logging the EventId 4001 so it worked for me.

Adminstrative Tools>Services>WLAN Auto Config—> Set to Manual.

Источник

Код события 4001 windows 7

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

General discussion

WARNING: Event ID 4001, WLAN AutoConfig service has successfully stopped.

The operative word there being «successfully «, and the stupidity on a Microsoft Developers part being; if it’s stopped successfully they why the ____ does it mess up my event log with a warning flag?

I get fed up of this garbage. Isn’t this why Vista failed so badly? You’d think Microsoft would learn.

All replies

This happens when your wireless network adapter is configured to turn off after a period of inactivity to save power.

It says successful because: It was configured to do so, and it did.
It pops as a warning because: This will result in network dis-connectivity, so if the user does not want it to be this way, he should change the setting.

That’s not stupid, that’s thoughtful on the Microsoft developer’s part for power saving. It’s just that we don’t see it the way it was meant to be.. 🙂
Hope it helps!

I too was receiving this error also, although my setup may be different than the users that have posted here.

I use my Ethernet NIC most of the time and keep my WLAN as a redundant backup in case the wired side drops. I was logging this error whether the adapter was enabled or not, since the service was still active in the Automatic mode.

Upon every boot, I was logging EventId 4001. I was able to keep the WLAN network adapter enabled and eliminate the error by simply switching the WLAN service setting from Automatic to Manual.

If you are using the wireless connection and NOT the Ethernet NIC, I am not sure if this will also work for you (as I have not tried it), but it did solve my error logging issue of the EventId 4001 in my situation, which was annoying me much in the same way as the others here have articulated, since there really is no need for a warning at all IMHO.

I am assuming that upon boot, the wireless service is called to respond ( in the automatic mode), and if there is not active connection, the service then will generate the message when the service is called to stop & listen for another call.

Hope this is of some help to the group, and in either case I am no longer logging the EventId 4001 so it worked for me.

Adminstrative Tools>Services>WLAN Auto Config—> Set to Manual.

Источник